hubcapcollector.com

The only site for threaded hubcap collectors!


Home :: Login
Album list :: Last uploads :: Last comments :: Most viewed :: Top rated :: My Favorites :: Search
Choose your language:

Home > User galleries > hubcapper > Hubcapper

Most viewed - Hubcapper
oldsmobile_CA_12_B.jpg
oldsmobile_CA_12_B.jpgOldsmobile79 viewshubcapper
International_Highwheeler_CFe_1_B.jpg
International_Highwheeler_CFe_1_B.jpgInternational High Wheeler79 viewshubcapper
CGV_CB_1_C.jpg
CGV_CB_1_C.jpgCGV Charron79 viewshubcapper
Oldsmobile_CA_10_A.JPG
Oldsmobile_CA_10_A.JPGOldsmobile 1914 - 1916 Face78 viewsOldsmobile, USA Cast aluminum threaded hub cap with an outside diameter of 6 7/8" and 4 3/16" high with 2 3/4"- 16 threads per inch. This is a front wheel cap and is smaller then the rear which is 8" OD X 5" high. The cap was used on 1914 through 1916 cars. hubcapper
Packard_CA_3_A.jpg
Packard_CA_3_A.jpgPackard - 78 viewsDESCRIPTION: Cast aluminum reproduction threaded hub cap for a Packard automobile. The reproduction is very well done and the cap looks good.

SIZE: The cap has an outside diameter of 3 15/16” and is 2 11/16” high with about 2 13/16”- 16 threads.
hubcapper
International_Highwheeler_NPCFe_1_A.jpg
International_Highwheeler_NPCFe_1_A.jpgInternational High Wheeler78 viewsDESCRIPTION: Nickel plated cast iron threaded hub cap for an International High Wheeler automobile built in Akron, Ohio between the years of 1907 and 1911. It has casting # 890E on the inside.
SIZE: The cap has an outside diameter of 2 1/2” and is 1 9/16” high with 2 1/4”- 20 threads per inch.
hubcapper
GrayDort_NPPS_3_C.jpg
GrayDort_NPPS_3_C.jpgGray Dort78 viewshubcapper
International_Highwheeler_CFe_1_C.jpg
International_Highwheeler_CFe_1_C.jpgInternational78 viewshubcapper
Charron_CB_1_A.jpg
Charron_CB_1_A.jpgCharron78 viewsDescription: Brass cap for a 1907-30 Charron

Dimension: 2 7/8” OD X 1 5/8” high with 2 ¾” internal threads. 2 1/8” across flats.



hubcapper
Little_NPPB_1_B.jpg
Little_NPPB_1_B.jpgLittle_NPPB_1_B.jpg77 viewsNPPB 2 3/8" OD X 1 5/8" High with 2 5/16"- 24 Threads per inch.hubcapper
Renault_BFe_1_D.JPG
Renault_BFe_1_D.JPGRenault 191477 viewsThis car was purchased from France as a chassis in 1914 and shipped to the USA where it was fitted with a custom built body by Locke & Co. It is in original condition.hubcapper
Hupmobile_CA_2_B.JPG
Hupmobile_CA_2_B.JPGHupmobile, USA, 1909 - 1913 model 20 Side77 viewshubcapper
GrayDort_NPPS_3_B.jpg
GrayDort_NPPS_3_B.jpgGray Dort77 viewshubcapper
Packard_PA_6_A1924.JPG
Packard_PA_6_A1924.JPGPackard_PA_6_a.jpg 77 viewsPackard 1924 Single Six.
3 31/32" OD X 2 19/64" high with 2 13/16"- 16 threads. This cap has a 1/16" radius along the top edge.
This cap for the 1924 Single Six is very similar to the other more common Packard caps but is 1/4" shorter and has a smaller radius along the top edge.
hubcapper
Kissel_Kar_NPPB_3_A.jpg
Kissel_Kar_NPPB_3_A.jpgKissel Kar77 viewsDESCRIPTION: Nickel plated pressed brass hub cap for a Kissel Kar automobile built in Hartford, Wisconsin between the years of 1907 and 1919. The Kar part of the name was dropped in 1919 in the wake of world war one because it sounded too German.
SIZE: The cap has an outside diameter of 2 15/16” and is 2 5/16” high with 2 13/16”- 16 threads.
hubcapper
313 files on 21 page(s) 11