| Search results - "fke" |
A4_WW_Wheel_Buick_Buffalo_CA_1_A.jpgA4 WW Wire Wheel Buffalo22 viewsBuffalo Wire Wheel for Buick. Approx 3 inches at baseFrank
|
|
Adler_CB_1_A.jpgAdler10 views• Description; Cast brass threaded hub cap for an Adler automobile built in Germany between the years of 1900 and 1939.
• Size; The cap has an outside diameter of just over 2 13/16” and is just over 2” high.
Frank
|
|
Albion_1a.JPGAlbion_CB_A_113 views* Description. Cast Brass threaded hubcap for an Albion built in Glasgow.
* Measurements. 3 1/16” OD X 1 13/32” H with 1.895 external threads.2 7/16” across flats
hubcapco
|
|
Albion_NPPS_1_A.jpgAlbion_NPPS_1_A8 views• DESCRIPTION: Nickel plated pressed steel threaded hub cap with a brass insert with two Celtic motifs for an Albion vehicle made in Glasgow.
• SIZE: The cap has an outside diameter of 5 1/8” at the flange, 2.702” high and 3.392 at the top.
• WEIGHT: 2 lb 12 oz (1250 g)
hubcapco
|
|
Alemite.jpgAlemite9 viewsAftermarket cap with built in grease nippleMatt
|
|
Allen_NPPB_1_A.jpgAllen 10 views• Description; Nickel Plated Pressed brass threaded hubcap for an Allen automobile built in Fostoria and Columbus, Ohio between the years of 1913 and 1922.
• Size; This cap has an outside diameter of 2 13/16” and is 1 13/16” high, 2 5/8 threadfrank
|
|
Allen_NPPB_1_B.jpgAllen12 viewsfrank
|
|
Alvis_CA_1_A.jpgAlvis Speed 2010 viewsDescription: Aluminium grease caps for Alvis Speed 20 (SA & SB I think) /Silver Eagle also. Flat aluminium type. Not chromed, which is correct.
Size: At thread 2 ¼ in, 2 7/16 diameter, 2 5/8 at sextant, 1 inch high Frank
|
|
Alvis_CA_2_A_jpg.jpgAlvis5 viewsDescription. Aluminium threaded hubcap for an Alvis
Dimension: 2" across the sextant, 1 1/4" high and 2 1/4" at threadsfrank
|
|
Alvis_CA_2_C.jpgAlvis5 viewsunderview and greasefrank
|
|
American_Austin_PA_1_A.jpgAmerican Austin11 views• Description; Pressed aluminum threaded hub cap for an American Austin automobile built in Butler, Pennsylvania between the years of 1930 and 1935
• Size; The cap has an outside diameter of 3 ½” and is 1 5/8” high with 2 3/16”- 16 threads.
Matt
|
|
American_LaFrance_NPPB_1_A.jpgAmerican LaFrance NPPB13 viewsDescription: AMERICAN LaFRANCE fire truck. Nickel plated Pressed Brass threaded hubcap with external threads. CAP CLEARLY SAYS "FOUNDED 1845, AMERICAN LaFRANCE, ELMIRA N.Y., U.S.A.",
Size: Overall measurement is 4 1/4" with a height of 1 1/4". Threads approx 3 3/4" in. Matt
|
|
Apperson_PA_1_A.jpgApperson14 viewsDescription: Pressed Al threaded hubcap with brass insert
Size: The outside diameter is about 3 1/8" wide and about 1 7/8" high. Matt
|
|
Argyll_NPCB_1_A.jpgArgyll7 views• DESCRIPTION: Nickel plated cast brass threaded hub cap . The Argyll was built in Galsgow, Scotland by Hozier Engineering ( 1899-1905) then Argyll Motors 1905-1932
• SIZE: The cap has an outside diameter of 3.035” at the flange and 2.355” at the octagon and is just under 1 1/4” high
• WEIGHT: 10 ¾ oz (303 g)
Matt
|
|
Armstrong_Siddeley_NPCB_1_A.jpgArmstrong Siddeley4 views• Description; Nickel plated cast brass threaded hubcap.
• Size: The cap has an outside diameter at the top of 2 2/3" ( 2.667”) and is .856" tall with an innser diameter at the threads of 1.777” . External threads
• Weight: 9 ½ oz.
Matt
|
|
| 298 files on 20 page(s) |
 |
1 | |
|
|
|
|
|
|
|
|
|
|
|
