| Last additions - hubcapper |
Peerless_CB_1_A.jpgPeerless_CB_1_A194 viewsDescription: Cast Brass with an aluminum insert
Dimensions: 4 1/8” OD X 2 1/8” High with 3 3/8” – 16 Threads per inch. 2 ½” across flats and weighs 1 lb. 11 ounceshubcapperApr 18, 2014
|
|
Dodge_Trk_CPPS_2.jpgDodge Truck121 viewsIt is a chrome plated steel cap with external threads. I thought for years that it was a Durant and had mine in with my Durant caps until I sold one on E-bay and the buyer set me straight. The small cap is used on the front and the large one on the rear. Dodge used these caps on different models through 1947. hubcapperJan 03, 2014
|
|
Henderson_Badge.jpgHenderson Radiator Emblem130 viewshubcapperNov 13, 2013
|
|
Chalmers_Badge.jpgChalmers Radiator Badge143 viewshubcapperNov 13, 2013
|
|
Heine_Velox__CB_1b.jpgHeine Velox100 viewshubcapperOct 24, 2013
|
|
Heine_Velox__CB_1a.jpgHeine Velox136 viewsDescription : Heine Velox was a piano builder that started building cars in 1906. The factory was destroyed by the San Francisco earth quake and car production ceased. They again started building cars from 1921 - 1923.
Dimension: Heine Velox, Cast Brass cap, 4 7/8" OD X 3" high with 4 3/4" - 16 Threads.It weighs 2 lbs 3 1/2 Ounces. This is a rear wheel cap.hubcapperOct 24, 2013
|
|
Truxmore__Fe_1b.jpgTruxmore87 viewshubcapperOct 23, 2013
|
|
Truxmore_Fe_1a.jpgTruxmore100 viewsDimension:The Truxmore is cast iron cap 4 3/16" OD X 2 5/8" high with 4"-16 threads. It weighs 2 1/3 pounds.
Description:Truxmore was a third axle assembly built by Truck Equipment Company Inc., Buffalo, NY. starting in 1921. The third axle assemblies were installed on two axle trucks to increase load capacity.
hubcapperOct 23, 2013
|
|
Vinot_NPCB_3_A.jpgVinot & Deguigand135 viewsDescription: Nickle plated brass cap for a Vinot & Deguigand
Dimensions: 70mm wide, 30mm high, 65mm external threads, 55mm across the octaganolhubcapperJul 26, 2012
|
|
Vinot_Deguigand_CB_1_A.jpgVinot & Deguigand132 viewsDescription: Cast brass cap from a Vinot made in France 1901-1926 at Puteaux and Nanterre, Seine.
Dimension: External 50 mm threads, 60mm diameter, 25 mm height and 55mm across the octaganol.hubcapperJul 10, 2012
|
|
Marion-Handley_NPCB_1_C.jpgMarion Handley124 viewshubcapperJun 30, 2012
|
|
Marion-Handley_NPCB_1_A.jpgMarion Handley135 viewsDescription . Nickel plated cast brass threaded cap from a 1916-1919 Marion Handley
Six-60 Touring Roadster.Manufactured in 1916. It is cast brass w/ nickel plating.
It measures: 4-1/4" OD and 2-1/4" high.
hubcapperJun 30, 2012
|
|
Girling_NPCB_1_A.jpgGirling197 viewsDescription:Cap from a Girling (1913-14) made by Girling Motors Ltd, Bedford GB
A 3 wheeled cyclecar with single cylinder 6 hp engine.
Dimensions : 2.675 ins / 6.6 cms across the top, 265 grams weight
hubcapperJun 23, 2012
|
|
Columbia_Electric_Vehicle_NPPB_2_A.jpgColumbia Electric124 viewshubcapperJun 15, 2012
|
|
Pope_Waverley_CFe_1_C.jpgPope Waverley102 viewshubcapperJun 15, 2012
|
|
| 314 files on 21 page(s) |
1 |
 |
|
|
|
|
|
|
|
|
|
