| Last additions |
Hansa-cb-1-A.jpgHansa Germany 1908-1939188 viewsHansa Hub cap . The cap has an OD of 70mm and is 27.5mm high with 64mm threads. It is 55mm across the flats. It is nickel plated cast brass with a brass insert.
frankApr 01, 2016
|
|
Le_Gui_1A.jpgLe Gui 237 viewsThe car was built between the years of 1904 and 1916, in Italy as the Guy and in France as the Le Gui. It was also known in England as the Millard-Le Gui after one of the importers who handled it.
The cap is cast brass with a copper insert and has an OD of 2.680” X 1 1/8” high. It is 2 ¼” across the flats and the OD of the threads is 2.160”
frankMar 08, 2015
|
|
Peerless_CB_1_A.jpgPeerless_CB_1_A260 viewsDescription: Cast Brass with an aluminum insert
Dimensions: 4 1/8” OD X 2 1/8” High with 3 3/8” – 16 Threads per inch. 2 ½” across flats and weighs 1 lb. 11 ounceshubcapperApr 18, 2014
|
|
Babcock_CB_2.jpgBabcock249 viewsH.H. Babcock Co, Watertown, N.Y (1909-1913) . The Babcock line included a motor buggy with a 2 cyl engine as well asa conventional car with a 35/40 hp 4cyl engine.DKuhnFeb 23, 2014
|
|
image~7.jpg1919 Detroit Electric270 views1919-1920's Detroit Electric. Pressed brass nickel plated with nickel plated brass emblem.
Overall diameter: 3 1/4"
Thread diameter: 2 1/2"
Height: 1 3/4"jakelJan 10, 2014
|
|
image~6.jpgDetroit Electric (side)232 viewsjakelJan 10, 2014
|
|
image~5.jpgDetroit Electric (Back)208 viewsjakelJan 10, 2014
|
|
image~4.jpgWillys 6221 views1920's Willys 6. Pressed aluminum.
Overall diameter: 3"
Thread diameter: 3"
Height: 1 1/2"jakelJan 10, 2014
|
|
image~3.jpgWillys 6 (Side)205 viewsjakelJan 10, 2014
|
|
image~2.jpgWillys 6 (Back)213 viewsjakelJan 10, 2014
|
|
REO_PA_5_A.jpg1927-1928 REO181 views1927-1928 REO. Similar to 1927-1928 Wolverine caps but with REO emblem. Pressed aluminum.
Overall diameter: 3 1/4"
Height: 2"jakelJan 10, 2014
|
|
REO_PA_5_B.jpg1927-1928 REO (side)158 viewsjakelJan 10, 2014
|
|
REO_PA_5_C.jpg1927-1928 REO (Back)132 viewsjakelJan 10, 2014
|
|
Zedel_CB_1_A.jpgZedel150 viewsNickel plated brass cap for a veteran Zedel
OD 4”
DEPTH 2”
ACROSS OCTAGONAL CENTRE 2 7/16
frankJan 08, 2014
|
|
Dodge_Trk_CPPS_2.jpgDodge Truck150 viewsIt is a chrome plated steel cap with external threads. I thought for years that it was a Durant and had mine in with my Durant caps until I sold one on E-bay and the buyer set me straight. The small cap is used on the front and the large one on the rear. Dodge used these caps on different models through 1947. hubcapperJan 03, 2014
|
|
| 2997 files on 200 page(s) |
1 |
 |
|
|
|
|
|
|
|
|
|
