| Last additions - Hubcapper |
Hansa-cb-1-A.jpgHansa Germany 1908-1939144 viewsHansa Hub cap . The cap has an OD of 70mm and is 27.5mm high with 64mm threads. It is 55mm across the flats. It is nickel plated cast brass with a brass insert.
frankApr 01, 2016
|
|
Peerless_CB_1_A.jpgPeerless_CB_1_A233 viewsDescription: Cast Brass with an aluminum insert
Dimensions: 4 1/8” OD X 2 1/8” High with 3 3/8” – 16 Threads per inch. 2 ½” across flats and weighs 1 lb. 11 ounceshubcapperApr 18, 2014
|
|
Dodge_Trk_CPPS_2.jpgDodge Truck140 viewsIt is a chrome plated steel cap with external threads. I thought for years that it was a Durant and had mine in with my Durant caps until I sold one on E-bay and the buyer set me straight. The small cap is used on the front and the large one on the rear. Dodge used these caps on different models through 1947. hubcapperJan 03, 2014
|
|
Heine_Velox__CB_1b.jpgHeine Velox109 viewshubcapperOct 24, 2013
|
|
Heine_Velox__CB_1a.jpgHeine Velox153 viewsDescription : Heine Velox was a piano builder that started building cars in 1906. The factory was destroyed by the San Francisco earth quake and car production ceased. They again started building cars from 1921 - 1923.
Dimension: Heine Velox, Cast Brass cap, 4 7/8" OD X 3" high with 4 3/4" - 16 Threads.It weighs 2 lbs 3 1/2 Ounces. This is a rear wheel cap.hubcapperOct 24, 2013
|
|
Truxmore__Fe_1b.jpgTruxmore97 viewshubcapperOct 23, 2013
|
|
Truxmore_Fe_1a.jpgTruxmore110 viewsDimension:The Truxmore is cast iron cap 4 3/16" OD X 2 5/8" high with 4"-16 threads. It weighs 2 1/3 pounds.
Description:Truxmore was a third axle assembly built by Truck Equipment Company Inc., Buffalo, NY. starting in 1921. The third axle assemblies were installed on two axle trucks to increase load capacity.
hubcapperOct 23, 2013
|
|
Vinot_NPCB_3_A.jpgVinot & Deguigand147 viewsDescription: Nickle plated brass cap for a Vinot & Deguigand
Dimensions: 70mm wide, 30mm high, 65mm external threads, 55mm across the octaganolhubcapperJul 26, 2012
|
|
Vinot_Deguigand_CB_1_A.jpgVinot & Deguigand141 viewsDescription: Cast brass cap from a Vinot made in France 1901-1926 at Puteaux and Nanterre, Seine.
Dimension: External 50 mm threads, 60mm diameter, 25 mm height and 55mm across the octaganol.hubcapperJul 10, 2012
|
|
Marion-Handley_NPCB_1_C.jpgMarion Handley133 viewshubcapperJun 30, 2012
|
|
Marion-Handley_NPCB_1_A.jpgMarion Handley143 viewsDescription . Nickel plated cast brass threaded cap from a 1916-1919 Marion Handley
Six-60 Touring Roadster.Manufactured in 1916. It is cast brass w/ nickel plating.
It measures: 4-1/4" OD and 2-1/4" high.
hubcapperJun 30, 2012
|
|
Girling_NPCB_1_A.jpgGirling212 viewsDescription:Cap from a Girling (1913-14) made by Girling Motors Ltd, Bedford GB
A 3 wheeled cyclecar with single cylinder 6 hp engine.
Dimensions : 2.675 ins / 6.6 cms across the top, 265 grams weight
hubcapperJun 23, 2012
|
|
Columbia_Electric_Vehicle_NPPB_2_A.jpgColumbia Electric132 viewshubcapperJun 15, 2012
|
|
Pope_Waverley_CFe_1_C.jpgPope Waverley107 viewshubcapperJun 15, 2012
|
|
Pope_Waverley_CFe_1_B.jpgPope Waverley122 viewshubcapperJun 15, 2012
|
|
| 313 files on 21 page(s) |
1 |
 |
|
|
|
|
|
|
|
|
|
