| Last comments - frank |
GMC_NPPB_1_A.jpgGMC - General Motors Corporation Truck161 views• Description; Nickel plated pressed brass threaded hub cap for an early GMC truck.
• Size; The cap has an outside diameter of 4” and is 1 ¾” high with 3 5/8”- 16 threads.
frank01/14/14 at 17:08frank: 8 sold on ebay 2005-2014. $41-$56. Last $46 av $...
|
|
Milburn.jpgMilburn217 viewsDescription: NPPB hreaded cap from a Milburn 1914-22Jeff06/14/13 at 08:12frank: 2 7/16" APPROX OD 104
|
|
Lambert_PB_2_A.jpgLambert179 viewsLAMBERT BRASS HUB CAP WITH 3 1/8" approx ODfrank06/12/13 at 19:17frank: 76
|
|
Stevens_Duryea_NPPB_1_A.jpgStevens Duryea150 viewsJeff06/12/13 at 17:03frank: 4 3/8 threads
|
|
Seagrave_NPPB_2_A.jpgSeagrave173 views5 1/4" approx THREAD.frank06/12/13 at 16:53frank: 65
|
|
Houk_Willys_Knight_CB_1_B.jpgHouk Willys Knight173 viewsfrank06/12/13 at 16:39frank: 204
|
|
Pope-Toledo_CB_1_A.jpgPope Toledo175 views• Description; Cast brass threaded hub cap for a Pope Toledo automobile built in Toledo, Ohio between the years of 1904 and 1909 at which time the Pope Toledo plant was acquired by Overland.
Size; The hub cap has an outside diameter of 2 15/16” and is about 1 ¾” high with 2 5/8”-
frank04/30/13 at 18:42frank: Average price for 3 on ebay 2005 -13 $298
|
|
Graham_Bros_Truck_PA_1_A.jpgGraham Brothers Truck266 views
• Description; Pressed aluminum threaded hub cap for a Graham Brothers truck built in Detroit, Michigan between the years of 1917 and 1932.
• Size; The has an outside diameter of 3 11/16” and is 2 3/16” high with 3 7/16”- 16 threads.
hubcapco10/31/12 at 08:32frank: Ray, Robert, and Joseph Graham ( they are the 3 he...
|
|
McLaughlin_NPPS_1_A.jpgMcLaughlin225 viewsDescription; Nickel plated pressed steel threaded hubcap for a McLaughlin automobile built in Oshawa, Ontario Canada by The McLaughlin Motor Car Co. Ltd. Between the years of 1908 and 1922.
Size; The cap has an outside diameter of about 2 27/32” and is 1 9/16” high with 2 ¾”- 16 threads.
frank04/23/11 at 13:37frank: The aluminium cap that just says Mclaughlin withou...
|
|
Unknown_NPCB_1_B.jpgUnknown Cap202 viewsI found this while metal detecting and believe it to be a hubcap. I'd appreciate any comments that might help to ID this. It measures 2 1/2" in diameter at the flange, 13/16 high, and is threaded on the outside. I believe it to be nickel plated cast brass though some of the plating is worn off from being buried. It has no markings on it.CliMac04/08/10 at 20:08frank: I have no idea what it is from. I have several cap...
|
|
Michigan_CB_1_A.jpgMighty Michigan 1908-1914164 viewsDescription: Michigan Buggy Co Kalamazoo, Mich began by making high-wheel buggies but by 1911 was producing low-built tourers and roadsters often referred in advertisements as the Mighty Michigan
Dimension: 3 1/8" diameter, 2 7/8" internal threads, 1 5/8" tall and 2 1/8" across the sextantSydney12/25/09 at 08:28frank: The Michigan Buggy Co of Kalamazoo motorized one o...
|
|
American_Six_CB_1_A.jpgAmerican Six233 viewsDescription: This brass threaded cap is from an American Six also known as the American Balanced Six. It was built in Plainfield, New Jersey between the years of 1917 and 1924 by The American Motors Corporation of Plainfield.
Dimension: The OD is 3 1/8” and it is 1 11/16” high with 3”- 20 threads. It is 2 1/8” across the flats.
hubcapper02/03/09 at 17:23frank: $311 2/02/09
|
|
Star_NPPB_UK_3_A.jpgStar Great Britain172 viewsDescription: A NPPB cap from a 1924-27 Star
Dimension: it is about 2 15/16" or 75 mm in overall diameter and 2 9/16" or 65 mm in diameter at the threaded section.
Note: this cap was originally classified as an Aster.
G.B. 1922 – 30. ASTER ENGINEERING CO LTD., WEMBLEY, MIDDLESEX.
THE WORD ASTER MEANS PERENIAL PLANT WITH LATE BLOOMING STAR LIKE FLOWERS. NOTE STAR DESIGN ON HUB CAP.
Jeff08/06/08 at 07:02frank: THE FIRST CAR WAS A FINELY CONSTRUCTED EXPENSIVE M...
|
|
Lancia_NPCB_1_A.jpgLancia Theta178 viewsDescription: Nickel plated Cast Brass threaded hubcap from a Theta.
Dimension: Diameter 3 1/4"( 85mm) Height 1 1/3 "( 34 mm) , thread approx 2 15/16" ( 75mm)frank04/14/08 at 11:11frank: Lancia IT 1906 now Alfa-Lancia ...
|
|
Elcar_NPPB_3_A.jpgElcar175 viewsIt meas. 4 3/16" in dia by 2 3/8" high. frank03/27/08 at 16:15frank: The Elcar was an American automobile manufactured ...
|
|
| 152 files on 11 page(s) |
1 |
 |
|
|
|
|
|
|
|
|
