hubcapcollector.com

The only site for threaded hubcap collectors!


Home :: Login
Album list :: Last uploads :: Last comments :: Most viewed :: Top rated :: My Favorites :: Search
Choose your language:

Home > User galleries > hubcapper > Hubcapper

Franklin_SB_3_B.jpg
Franklin_SB_3_B.jpgFranklin71 viewshubcapper
Franklin_SB_3_C.jpg
Franklin_SB_3_C.jpgFranklin75 viewshubcapper
Girling_NPCB_1_A.jpg
Girling_NPCB_1_A.jpgGirling213 viewsDescription:Cap from a Girling (1913-14) made by Girling Motors Ltd, Bedford GB
A 3 wheeled cyclecar with single cylinder 6 hp engine.

Dimensions : 2.675 ins / 6.6 cms across the top, 265 grams weight
hubcapper
Grant_PA_3_A.jpg
Grant_PA_3_A.jpgGrant75 viewsDESCRIPTION: Pressed aluminum threaded hubcap for a Grant automobile built in Detroit, Michigan in 1913, Findlay, Ohio from 1913 thru 1916 and Cleveland, Ohio from 1916 to 1922.
SIZE: The cap has an outside diameter of 3” and is 1 11/16” high with 2 5/8”- 16 threads.
hubcapper
Grant_PA_3_B.jpg
Grant_PA_3_B.jpgGrant67 viewshubcapper
Grant_PA_3_C.jpg
Grant_PA_3_C.jpgGrant75 viewshubcapper
GrayDort_NPPS_3_A.jpg
GrayDort_NPPS_3_A.jpgGray Dort93 viewsDESCRIPTION: Nickel plated pressed steel threaded hub cap for a Gray Dort automobile built in Canada between the years of 1917 and 1924. This cap has the single circle around the name and my notes show it to fit 1915 to 1922 cars.
SIZE: The cap has an outside diameter of 2 15/16” and is 1 13/16” high with 2 13/16”- 14 threads.
hubcapper
GrayDort_NPPS_3_B.jpg
GrayDort_NPPS_3_B.jpgGray Dort77 viewshubcapper
GrayDort_NPPS_3_C.jpg
GrayDort_NPPS_3_C.jpgGray Dort78 viewshubcapper
Hansa-cb-1-A.jpg
Hansa-cb-1-A.jpgHansa Germany 1908-1939172 viewsHansa Hub cap . The cap has an OD of 70mm and is 27.5mm high with 64mm threads. It is 55mm across the flats. It is nickel plated cast brass with a brass insert.
frank
Hayes_Hupmobile_Insert_R_Model.jpg
Hayes_Hupmobile_Insert_R_Model.jpgHayes Insert #4 Hupmobile 109 viewsThe Hayes hub cap emblem was used on the model R Hupp series R-1 – R4 and also the R-6 between 1918 and 1921. It came in two sizes for a #4 and a #5 Hayes hub cap.The # 5 Hayes was used on the series R-1 & R-2 and the #4 Hayes was used on the R-3 thru R-4 & R-6 models.
hubcapper
Hayes_NPPS_1_A.jpg
Hayes_NPPS_1_A.jpgHayes Wire Wheel93 viewsDESCRIPTION: Nickel plated pressed steel threaded hub cap for a car fitted with Hayes wire wheels from the teens or 1920s era.
SIZE: The cap has an outside diameter of 2 11/32” and is just under 2 5/16” high with 2 11/32”- 18 threads. The actual OD of the threads measures 2.338”.
hubcapper
Hayes_NPPS_1_B.jpg
Hayes_NPPS_1_B.jpgHayes71 viewshubcapper
Hayes_NPPS_1_C.jpg
Hayes_NPPS_1_C.jpgHayes Wire Wheel64 viewshubcapper
Haynes_NPPB_4_A.jpg
Haynes_NPPB_4_A.jpgHaynes 191480 viewsDESCRIPTION: Nickel plated pressed brass threaded hub cap for a Haynes automobile built in Kokomo, Indiana between the years of 1904 and 1925. My notes show this to be from 1914.
SIZE: The cap has an outside diameter of 3 7/8” and is 1 15/16” high with 3 7/16”- 16 threads.
hubcapper
313 files on 21 page(s) 6