The only site for threaded hubcap collectors!

Home :: Login
Album list :: Last uploads :: Last comments :: Most viewed :: Top rated :: My Favorites :: Search
Choose your language:

Home > User galleries > hubcapper > Hubcapper

Oakland_PA_5_C.jpgOakland77 viewshubcapper
Oldsmobile_CA_10_A.JPGOldsmobile 1914 - 1916 Face80 viewsOldsmobile, USA Cast aluminum threaded hub cap with an outside diameter of 6 7/8" and 4 3/16" high with 2 3/4"- 16 threads per inch. This is a front wheel cap and is smaller then the rear which is 8" OD X 5" high. The cap was used on 1914 through 1916 cars. hubcapper
Oldsmobile_CA_10_B.JPGOldsmobile 1914 - 1916 Side67 viewshubcapper
Oldsmobile_CA_10_C.JPGOldsmobile 1914 - 1916 Bottom73 viewshubcapper
Oldsmobile_CA_10_D.JPGOldsmobile 191672 viewsOldsmobile, USA 1914 - 1916 cars used a one piece cast aluminum hub cap. The front cap being smaller then the rear.hubcapper
Oldsmobile_CA_11_A.JPGOldsmobile, USA, Face84 viewsOldsmobile cast aluminum one piece hub cap with an aluminum insert. The cap has an outside diameter of 8" and is 5" high with 2 3/4" - 16 threads. This cap is believed to be a rear wheel cap from the 1914 era.hubcapper
Oldsmobile_CA_11_B.JPGOldsmobile, USA, Side72 viewshubcapper
Oldsmobile_CA_11_C.JPGOldsmobile, USA, Bottom72 viewshubcapper
oldsmobile_CA_12_A.jpgOldsmobile 1909 Model D101 viewsDESCRIPTION: Cast aluminum threaded hub cap with a brass insert for a very early Oldsmobile automobile. The cap is marked as being from a 1909 model D but also appears to be the same as the front wheel cap for the Oldsmobile Limited. I am not positive of the application.
SIZE: The cap has an outside diameter of 4” and is 1 ¼” high with external threads that measure 3.710”- 16. The peaks on the threads are flattened and they could be 3 ¾”.
oldsmobile_CA_12_B.jpgOldsmobile81 viewshubcapper
oldsmobile_CA_12_C.jpgOldsmobile93 viewshubcapper
Oldsmobile_NPCFe_2_A.jpgOldsmobile front88 viewsDESCRIPTION: Nickel plated cast iron threaded hubcap from a late teens or early 1920s Oldsmobile automobile. I believe this is a front cap because of the smaller size.
SIZE: The cap has an outside diameter of about 3 5/16” and is 1 27/32” high with 2 ½”- 16 threads. The outside diameter of the thread flange is 2 ¾”.
Opel_CB_1_A.jpgOpel77 viewsDESCRIPTION: Cast brass threaded hub cap for an Opel automobile built in Germany beginning in 1898.
SIZE: The cap has an outside diameter of just under 3 1/8” and is 1 ¼” high. It is just over 2 ¼” across the flats.
Opel_CB_1_B.jpgOpel69 viewshubcapper
Opel_CB_1_C.jpgOpel73 viewshubcapper
313 files on 21 page(s) 13